Windows 7 will detect and pop up a wizard to install drivers when our is plugged in, but it’s also easy (as essential on other operating systems) to install the driver software first. Get the driver from: You’ll want to download the driver and unzip it anywhere on your desktop. Once you have, double click on it to start the installation. The installation is relatively simple and no questions are asked. When it’s done you should see something like this: Now go ahead and connect the adapter. You should get a pop-up looking like this: Finally Windows should report that the device has been installed: On Device Manager you should be looking at something like this:. Now, If you want to change the COM port assignment, here’s.
61018 Driver USB to Serial Port Driver Prolific USB-to-Serial Comm Port Driver Manufacturers DeLOCK Prolific Supported Operating Systems Windows XP, Windows 2000, Windows ME, Windows 98SE, Windows 98 File Name DL_61018_A_05052003_12.zip (944.2 KB). Setting up a Serial Terminal with Mac* OS X*. Installed the appropriate drivers, and flashed the OS image (formerly called firmware). Connect to the USB serial device using the Terminal screen utility by entering the command: screen /dev/xx.usbserial-XXXXXXXX 115200 –L.
Hi Norman, Because the USB serial adapters work with a wide range of legacy equipment they often require some configuration in order to work. Are you using Plugable adapters? If so, please contact us at.
I’ll be happy to help with it. If you are using another brand, check in device manager for the Ports (COM & LPT) listing shown in the blog post above. If you installed the correct driver, and it’s not showing up there, it is possible your adapters have a counterfeit chip.
Prolific has specifically written its drivers to check for a genuine chip and not work if the chip is fake. If you are sure the chip is genuine, and its not showing up in Device Manager for both adapters, it’s likely a software issue. If it is showing up in Device Manager, but not connecting to your computer, please make sure the COM port shown in Device Manager is set in the software you are using to communicate with your device and that you have the correct type cable (Null Modem or Straight) for your device and that the Port settings are correct. I hope this helps, David Plugable Support.
ray-an. Hi Ajay, Thank you for posting.
Delock Usb Serial Driver For Mac Free
Are you using the Plugable USB-Serial adapter? If so, please contact us at. If it isn’t a Plugable serial adapter, it is difficult to troubleshoot, since many non-Plugable adapters have counterfeit chips in them and don’t work with the Prolific drivers. A few pointers though: 1.
Go to Device Manager Ports(Serial & LPT) and check which COM port the Prolific serial adapter is using. Make sure that port is set in the software you are using to communicate with your peripheral device. Make sure you are using the right cable for your application. Some devices, like Cisco routers, only work with the cable supplied by their maker. Other devices require a Null Modem cable, which connects send on each side to Receive on the other side.
Delock Usb Serial Driver For Mac Download
You can usually find out which to use by consulting the manual for your device. Make sure the port settings are correct. You can change these by double-clicking the USB-Serial adapter in Device manager, then selecting Port Settings from the Properties window that will open.
I hope this helps. David Plugable Support. Jagadeesh.